from .........Internal.Core import Core
from .........Internal.CommandsGroup import CommandsGroup
from .........Internal.StructBase import StructBase
from .........Internal.ArgStruct import ArgStruct
from ......... import repcap
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class Static:
"""Static commands group definition. 1 total commands, 0 Sub-groups, 1 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._base = CommandsGroup("static", core, parent)
# noinspection PyTypeChecker
[docs] class StaticStruct(StructBase):
"""Structure for setting input parameters. Fields: \n
- Time_Start: float: numeric Start and end time of the area Range: -50 µs to 600 µs, Unit: s
- Time_End: float: numeric Start and end time of the area Range: -50 µs to 600 µs, Unit: s
- Rel_Lev_Start: float: numeric Start and end level of the relative limit for the area Range: -100 dB to 10 dB, Unit: dB
- Rel_Lev_End: float: numeric Start and end level of the relative limit for the area Range: -100 dB to 10 dB, Unit: dB
- Abs_Lev_Start: float or bool: numeric | OFF | ON Start and end level of the absolute limit for the area Range: -100 dBm to 10 dBm, Unit: dBm Additional parameters: OFF | ON (disables start/end level | enables start/end level using the previous/default values)
- Abs_Lev_End: float or bool: numeric | OFF | ON Start and end level of the absolute limit for the area Range: -100 dBm to 10 dBm, Unit: dBm Additional parameters: OFF | ON (disables start/end level | enables start/end level using the previous/default values)
- Enable: bool: ON | OFF ON: Enable area no OFF: Disable area no"""
__meta_args_list = [
ArgStruct.scalar_float('Time_Start'),
ArgStruct.scalar_float('Time_End'),
ArgStruct.scalar_float('Rel_Lev_Start'),
ArgStruct.scalar_float('Rel_Lev_End'),
ArgStruct.scalar_float_ext('Abs_Lev_Start'),
ArgStruct.scalar_float_ext('Abs_Lev_End'),
ArgStruct.scalar_bool('Enable')]
def __init__(self):
StructBase.__init__(self, self)
self.Time_Start: float = None
self.Time_End: float = None
self.Rel_Lev_Start: float = None
self.Rel_Lev_End: float = None
self.Abs_Lev_Start: float or bool = None
self.Abs_Lev_End: float or bool = None
self.Enable: bool = None
[docs] def set(self, structure: StaticStruct, qamOrder=repcap.QamOrder.Default, usefulPart=repcap.UsefulPart.Default) -> None:
"""SCPI: CONFigure:GSM:MEASurement<Instance>:MEValuation:LIMit:QAM<ModOrder>:PVTime:UPPer:UPARt<nr>:STATic \n
Snippet: driver.configure.multiEval.limit.qam.powerVsTime.upper.upart.static.set(value = [PROPERTY_STRUCT_NAME](), qamOrder = repcap.QamOrder.Default, usefulPart = repcap.UsefulPart.Default) \n
These commands define and activate upper limit lines for the measured power vs. time. The lines apply to the modulation
schemes GMSK, 8PSK (EPSK) or 16-QAM (QAM16) . Each line consists of three sections: rising edge (REDGe) , useful part
(UPARt) and falling edge (FEDGe) . Each section consists of several areas for which relative and absolute limits can be
defined (if both are defined the higher limit overrules the lower one) . \n
:param structure: for set value, see the help for StaticStruct structure arguments.
:param qamOrder: optional repeated capability selector. Default value: Nr16 (settable in the interface 'Qam')
:param usefulPart: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Upart')"""
qamOrder_cmd_val = self._base.get_repcap_cmd_value(qamOrder, repcap.QamOrder)
usefulPart_cmd_val = self._base.get_repcap_cmd_value(usefulPart, repcap.UsefulPart)
self._core.io.write_struct(f'CONFigure:GSM:MEASurement<Instance>:MEValuation:LIMit:QAM{qamOrder_cmd_val}:PVTime:UPPer:UPARt{usefulPart_cmd_val}:STATic', structure)
[docs] def get(self, qamOrder=repcap.QamOrder.Default, usefulPart=repcap.UsefulPart.Default) -> StaticStruct:
"""SCPI: CONFigure:GSM:MEASurement<Instance>:MEValuation:LIMit:QAM<ModOrder>:PVTime:UPPer:UPARt<nr>:STATic \n
Snippet: value: StaticStruct = driver.configure.multiEval.limit.qam.powerVsTime.upper.upart.static.get(qamOrder = repcap.QamOrder.Default, usefulPart = repcap.UsefulPart.Default) \n
These commands define and activate upper limit lines for the measured power vs. time. The lines apply to the modulation
schemes GMSK, 8PSK (EPSK) or 16-QAM (QAM16) . Each line consists of three sections: rising edge (REDGe) , useful part
(UPARt) and falling edge (FEDGe) . Each section consists of several areas for which relative and absolute limits can be
defined (if both are defined the higher limit overrules the lower one) . \n
:param qamOrder: optional repeated capability selector. Default value: Nr16 (settable in the interface 'Qam')
:param usefulPart: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Upart')
:return: structure: for return value, see the help for StaticStruct structure arguments."""
qamOrder_cmd_val = self._base.get_repcap_cmd_value(qamOrder, repcap.QamOrder)
usefulPart_cmd_val = self._base.get_repcap_cmd_value(usefulPart, repcap.UsefulPart)
return self._core.io.query_struct(f'CONFigure:GSM:MEASurement<Instance>:MEValuation:LIMit:QAM{qamOrder_cmd_val}:PVTime:UPPer:UPARt{usefulPart_cmd_val}:STATic?', self.__class__.StaticStruct())