Mpoint<MeasPoint>¶
RepCap Settings
# Range: Nr1 .. Nr20
rc = driver.configure.multiEval.limit.epsk.smodulation.mpoint.repcap_measPoint_get()
driver.configure.multiEval.limit.epsk.smodulation.mpoint.repcap_measPoint_set(repcap.MeasPoint.Nr1)
SCPI Commands
CONFigure:GSM:MEASurement<Instance>:MEValuation:LIMit:EPSK:SMODulation:MPOint<MeasPoint>
- class Mpoint[source]
Mpoint commands group definition. 1 total commands, 0 Sub-groups, 1 group commands Repeated Capability: MeasPoint, default value after init: MeasPoint.Nr1
- class MpointStruct[source]
Structure for setting input parameters. Fields:
Min_Pow_Level_Rel: float: numeric Relative power limit applicable below the low reference power Range: -120 dB to 31.5 dB, Unit: dB
Max_Pow_Level_Rel: float: numeric Relative power limit applicable above the high reference power Range: -120 dB to 31.5 dB, Unit: dB
Abs_Power_Level: float: numeric Alternative absolute power limit. If the relative limits are tighter than the absolute limit, the latter applies. Range: -120 dBm to 31.5 dBm, Unit: dBm
Enable: bool: ON | OFF ON: Enable limits for the given no OFF: Disable limits for the given no
- get(measPoint=<MeasPoint.Default: -1>) → MpointStruct[source]
# SCPI: CONFigure:GSM:MEASurement<Instance>:MEValuation:LIMit:EPSK:SMODulation:MPOint<nr> value: MpointStruct = driver.configure.multiEval.limit.epsk.smodulation.mpoint.get(measPoint = repcap.MeasPoint.Default)
Defines and activates a limit line for the modulation schemes 8PSK and 16-QAM and for a certain frequency offset. The specified limits apply above the high power reference value and below the low power reference value defined by method RsCmwGsmMeas.Configure.MultiEval.Limit.Epsk.Smodulation.rpower and method RsCmwGsmMeas.Configure.MultiEval.Limit.Qam. Smodulation.Rpower.set. Between the two reference power values, the limits are determined by linear interpolation.
- param measPoint
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mpoint’)
- return
structure: for return value, see the help for MpointStruct structure arguments.
- set(structure: RsCmwGsmMeas.Implementations.Configure_.MultiEval_.Limit_.Epsk_.Smodulation_.Mpoint.Mpoint.MpointStruct, measPoint=<MeasPoint.Default: -1>) → None[source]
# SCPI: CONFigure:GSM:MEASurement<Instance>:MEValuation:LIMit:EPSK:SMODulation:MPOint<nr> driver.configure.multiEval.limit.epsk.smodulation.mpoint.set(value = [PROPERTY_STRUCT_NAME](), measPoint = repcap.MeasPoint.Default)
Defines and activates a limit line for the modulation schemes 8PSK and 16-QAM and for a certain frequency offset. The specified limits apply above the high power reference value and below the low power reference value defined by method RsCmwGsmMeas.Configure.MultiEval.Limit.Epsk.Smodulation.rpower and method RsCmwGsmMeas.Configure.MultiEval.Limit.Qam. Smodulation.Rpower.set. Between the two reference power values, the limits are determined by linear interpolation.
- param structure
for set value, see the help for MpointStruct structure arguments.
- param measPoint
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mpoint’)
Cloning the Group
# Create a clone of the original group, that exists independently
group2 = driver.configure.multiEval.limit.epsk.smodulation.mpoint.clone()