from .......Internal.Core import Core
from .......Internal.CommandsGroup import CommandsGroup
from .......Internal.StructBase import StructBase
from .......Internal.ArgStruct import ArgStruct
from .......Internal.RepeatedCapability import RepeatedCapability
from ....... import repcap
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class Mpoint:
"""Mpoint commands group definition. 1 total commands, 0 Sub-groups, 1 group commands
Repeated Capability: MeasPoint, default value after init: MeasPoint.Nr1"""
def __init__(self, core: Core, parent):
self._core = core
self._base = CommandsGroup("mpoint", core, parent)
self._base.rep_cap = RepeatedCapability(self._base.group_name, 'repcap_measPoint_get', 'repcap_measPoint_set', repcap.MeasPoint.Nr1)
def repcap_measPoint_set(self, enum_value: repcap.MeasPoint) -> None:
"""Repeated Capability default value numeric suffix.
This value is used, if you do not explicitely set it in the child set/get methods, or if you leave it to MeasPoint.Default
Default value after init: MeasPoint.Nr1"""
self._base.set_repcap_enum_value(enum_value)
def repcap_measPoint_get(self) -> repcap.MeasPoint:
"""Returns the current default repeated capability for the child set/get methods"""
# noinspection PyTypeChecker
return self._base.get_repcap_enum_value()
# noinspection PyTypeChecker
[docs] class MpointStruct(StructBase):
"""Structure for setting input parameters. Fields: \n
- Min_Pow_Level_Rel: float: numeric Relative power limit applicable below the low reference power Range: -120 dB to 31.5 dB, Unit: dB
- Max_Pow_Level_Rel: float: numeric Relative power limit applicable above the high reference power Range: -120 dB to 31.5 dB, Unit: dB
- Abs_Power_Level: float: numeric Alternative absolute power limit. If the relative limits are tighter than the absolute limit, the latter applies. Range: -120 dBm to 31.5 dBm, Unit: dBm
- Enable: bool: ON | OFF ON: Enable limits for the given no OFF: Disable limits for the given no"""
__meta_args_list = [
ArgStruct.scalar_float('Min_Pow_Level_Rel'),
ArgStruct.scalar_float('Max_Pow_Level_Rel'),
ArgStruct.scalar_float('Abs_Power_Level'),
ArgStruct.scalar_bool('Enable')]
def __init__(self):
StructBase.__init__(self, self)
self.Min_Pow_Level_Rel: float = None
self.Max_Pow_Level_Rel: float = None
self.Abs_Power_Level: float = None
self.Enable: bool = None
[docs] def set(self, structure: MpointStruct, measPoint=repcap.MeasPoint.Default) -> None:
"""SCPI: CONFigure:GSM:MEASurement<Instance>:MEValuation:LIMit:EPSK:SMODulation:MPOint<nr> \n
Snippet: driver.configure.multiEval.limit.epsk.smodulation.mpoint.set(value = [PROPERTY_STRUCT_NAME](), measPoint = repcap.MeasPoint.Default) \n
Defines and activates a limit line for the modulation schemes 8PSK and 16-QAM and for a certain frequency offset.
The specified limits apply above the high power reference value and below the low power reference value defined by method
RsCmwGsmMeas.Configure.MultiEval.Limit.Epsk.Smodulation.rpower and method RsCmwGsmMeas.Configure.MultiEval.Limit.Qam.
Smodulation.Rpower.set. Between the two reference power values, the limits are determined by linear interpolation. \n
:param structure: for set value, see the help for MpointStruct structure arguments.
:param measPoint: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Mpoint')"""
measPoint_cmd_val = self._base.get_repcap_cmd_value(measPoint, repcap.MeasPoint)
self._core.io.write_struct(f'CONFigure:GSM:MEASurement<Instance>:MEValuation:LIMit:EPSK:SMODulation:MPOint{measPoint_cmd_val}', structure)
[docs] def get(self, measPoint=repcap.MeasPoint.Default) -> MpointStruct:
"""SCPI: CONFigure:GSM:MEASurement<Instance>:MEValuation:LIMit:EPSK:SMODulation:MPOint<nr> \n
Snippet: value: MpointStruct = driver.configure.multiEval.limit.epsk.smodulation.mpoint.get(measPoint = repcap.MeasPoint.Default) \n
Defines and activates a limit line for the modulation schemes 8PSK and 16-QAM and for a certain frequency offset.
The specified limits apply above the high power reference value and below the low power reference value defined by method
RsCmwGsmMeas.Configure.MultiEval.Limit.Epsk.Smodulation.rpower and method RsCmwGsmMeas.Configure.MultiEval.Limit.Qam.
Smodulation.Rpower.set. Between the two reference power values, the limits are determined by linear interpolation. \n
:param measPoint: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Mpoint')
:return: structure: for return value, see the help for MpointStruct structure arguments."""
measPoint_cmd_val = self._base.get_repcap_cmd_value(measPoint, repcap.MeasPoint)
return self._core.io.query_struct(f'CONFigure:GSM:MEASurement<Instance>:MEValuation:LIMit:EPSK:SMODulation:MPOint{measPoint_cmd_val}?', self.__class__.MpointStruct())
def clone(self) -> 'Mpoint':
"""Clones the group by creating new object from it and its whole existing sub-groups
Also copies all the existing default Repeated Capabilities setting,
which you can change independently without affecting the original group"""
new_group = Mpoint(self._core, self._base.parent)
self._base.synchronize_repcaps(new_group)
return new_group