Ber

SCPI Commands

CONFigure:GSM:MEASurement<Instance>:MEValuation:LIST:SEGMent<Segment>:BER
class Ber[source]

Ber commands group definition. 1 total commands, 0 Sub-groups, 1 group commands

class BerStruct[source]

Structure for setting input parameters. Contains optional setting parameters. Fields:

  • Statistic: int: integer The statistical length is defined in slots. It is limited by the number of evaluated slots (defined via step length or frame pattern) . Range: 1 to 100

  • Enable: bool: OFF | ON ON: Enable BER measurement OFF: Disable measurement

  • Loop_Type: enums.LoopType: C | SRB C: Loop C SRB: SRB loop

  • Frame_Pattern: str: Optional setting parameter. binary 8-digit binary value, defines the evaluated timeslots in each TDMA frame. Used only if no step length is configured (see [CMDLINK: CONFigure:GSM:MEASi:MEValuation:LIST:SLENgth CMDLINK]) . Range: #B00000000 to #B11111111 (no slots … all slots measured)

get(segment=<Segment.Default: -1>) → BerStruct[source]
# SCPI: CONFigure:GSM:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>:BER
value: BerStruct = driver.configure.multiEval.listPy.segment.ber.get(segment = repcap.Segment.Default)

Defines the statistical length for averaging and enables the BER measurement in segment no. <no>; see ‘List Mode’.

param segment

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

return

structure: for return value, see the help for BerStruct structure arguments.

set(structure: RsCmwGsmMeas.Implementations.Configure_.MultiEval_.ListPy_.Segment_.Ber.Ber.BerStruct, segment=<Segment.Default: -1>) → None[source]
# SCPI: CONFigure:GSM:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>:BER
driver.configure.multiEval.listPy.segment.ber.set(value = [PROPERTY_STRUCT_NAME](), segment = repcap.Segment.Default)

Defines the statistical length for averaging and enables the BER measurement in segment no. <no>; see ‘List Mode’.

param structure

for set value, see the help for BerStruct structure arguments.

param segment

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)