Current

SCPI Commands

FETCh:GSM:MEASurement<Instance>:MEValuation:LIST:MODulation:PERRor:PEAK:CURRent
CALCulate:GSM:MEASurement<Instance>:MEValuation:LIST:MODulation:PERRor:PEAK:CURRent

class Current

Current commands group definition. 2 total commands, 0 Sub-groups, 2 group commands

calculate() → List[float]

# SCPI: CALCulate:GSM:MEASurement<Instance>:MEValuation:LIST:MODulation:PERRor:PEAK:CURRent
value: List[float] = driver.multiEval.listPy.modulation.perror.peak.current.calculate()

Return phase error peak values for all measured list mode segments. The values described below are returned by FETCh commands. CALCulate commands return limit check results instead, one value for each result listed below.

Use RsCmwGsmMeas.reliability.last_value to read the updated reliability indicator.

return

phase_error_peak: float Comma-separated list of values, one per measured segment Range: -180 deg to 180 deg (AVERage: 0 deg to 180 deg, SDEViation: 0 deg to 90 deg) , Unit: deg

fetch() → List[float]

# SCPI: FETCh:GSM:MEASurement<Instance>:MEValuation:LIST:MODulation:PERRor:PEAK:CURRent
value: List[float] = driver.multiEval.listPy.modulation.perror.peak.current.fetch()

Return phase error peak values for all measured list mode segments. The values described below are returned by FETCh commands. CALCulate commands return limit check results instead, one value for each result listed below.

Use RsCmwGsmMeas.reliability.last_value to read the updated reliability indicator.

return

phase_error_peak: float Comma-separated list of values, one per measured segment Range: -180 deg to 180 deg (AVERage: 0 deg to 180 deg, SDEViation: 0 deg to 90 deg) , Unit: deg